250 HP Electric Drive
250 Motor
- 250 HP
- 1.3 MMSCFD @1200psgi
- 1.5 MMSCFD @800psgi
- - NOx (g/Hp-Hr)
- - CO (g/Hp-Hr
- - NMHC (g/Hp-Hr
Package Features:
- All vessels are designed and built to meet ASME Section VIII with 1/8” corrosion allowance
- Suction vessel designed to API 11P Class 3
- All piping meets or exceeds ASME B31.3
- API 618 Design Approach 2 pulsation and mechanical analysis performed for smooth operations
- Rigid skid with 1.5 times capacity environmental containment designed for packed earthen pad.
- Skid edge air connection for pneumatic end devices. (Air compressor not included)
- Pre‐Lube pump on skid (Starter not included)
- M‐Link telemetry included.
Driver: 250hp Motor @1800 rpm
- TEFC, 3/60/460 447TY frame (Starter not Included)
- Inverter Rated
- 4140 Shaft
- Bearing and Winding RTD’s
- Bearing Heater
Compressor: CiP PHT/2
- 250 BHP 2‐Throw Frame
- 50‐1800 RPM
- 3” Stroke
- 20,000 lbf Total Rod Load (11,500 lbf Compression, 10,500 lbf Tension)
- VVCP on 1st stage cylinders
- (7) Spacers on 3rd stage cylinder
Compression Stage | Cylinder | MAWP |
---|---|---|
1st Stage | 7.5” | 350 |
2nd Stage | 5” | 1000 |
3rd Stage | 3” | 1500 |
Cooler: 48” AXH Air‐Coolers or equal
Minimum design parameters:
- 3,000’ elevation
- 110 oF ambient
- All tubes SA 214 Carbon Steel with Aluminum fins
- Auto Louvers Inside and Outside each gas section included
- ASME Code Stamp per ASME Section VIII, Div 1 with Nat’l Board Registered included
*Contact NGSG for details